• High quality and durable and reusable.
• Looks fashion and compact.
• This device has six functions: compass, altimeter, barometer, thermometer, weather forecast and time display.
• Time with hour, minute, second, 24 hours format clock display.
• Compress: 4-bearing mode display and magnetic declination setting.
• Next 12 to 24 hours weather forecast.
• All functions are displayed on LCD screen with super bright LED backlight.
• Easy to use and easy to carry with this detachable string included.
• Uses CR2032 lithium battery.
• Ideal for outdoor activities.

• High quality and durable and reusable.
• Looks fashion and compact.
• This device has six functions: compass, altimeter, barometer, thermometer, weather forecast and time display.
• Time with hour, minute, second, 24 hours format clock display.
• Compress: 4-bearing mode display and magnetic declination setting.
• Next 12 to 24 hours weather forecast.
• All functions are displayed on LCD screen with super bright LED backlight.
• Easy to use and easy to carry with this detachable string included.
• Uses CR2032 lithium battery.
• Ideal for outdoor activities.

 ทำจากวัสดดุเหล็กพ่นสี และอะคลิลิค

ช่องแสงหลอดไฟ ใส้หลอด หรือ Laser doide

ปรับมุมการตกกระทบ สะท้อนได้ตลอดย่าน มุม

 

Application
This product is applicable for the safe performance test of electronic components and parts and provides the reliable test and product selection test, etc; Through the chamber test, the product reliability can be improved and the quality control can be conducted.
Chamber Structure
All functions adopt the computer control with good operation interface so as to ensure the user’s operation and monitoring is more simple and straightforward. The cold chamber and hot chamber are controlled independently and the chamber doors are independent of each other so as to enlarge the use range of the test chamber (1 chamber for 3 purposes). A standard lead hole pipe is installed on the top of the chamber in order to facilitate users to lead sensor cable, inspection cable etc into the chamber.
Control System
The switching time between low temperature zone and high temperature zone is not more than 15sec. The temperature recovery time is not more than 5min.
Specs & Technical Parameters
Model	UQTS-162	UQTS-340	UQTS-500	UQTS-1000
Workroom dimensions (cm)	45*45*45	60*60*60	80*80*80	100*100*100
Exterior dimensions (cm)	156*87*154.5	171*102*184.5	191*122*226.5	211*142*266.5
Sample zone dimensions	30*30*25	45*45*36	65*65*50	85*85*70
Temperature range	A:-20℃~200℃  B:-40℃~200℃  C:-60℃~200℃
Temperature fluctuation	≤±2℃ for high temperature and low temperature
Temperature fluctuation	≤±0.5℃ (under constant temperature)
Sample zone load	20kg	30kg	50kg	60kg

 

Application
This product is a kind of testing equipment simulating a humid environment and it is applied for the test and assessment of the labs of petroleum, chemical etc and universities and research institute etc on the performance of metals to persist to rust.
Chamber Structure
The inner bladder of the chamber is made of SUS304 stainless steel plate while the outer housing is made of A3 steel plate sprayed with plastic. The temperature maintaining system adopts super-thin glass fiber filled temperature maintaining zone. The chamber door adopts refined silicone rubber seal. Adopts the water adding function activated in case of water shortage.
Specs & Technical Parameters
Model	UQRG-100	UQRG-250	UQRG-400
Workroom dimensions (cm)	45*45*55	58*58*68	68*68*80
Exterior dimensions (cm)	69*64*127	82*77*140	92*87*152
Power	3.0(KW)	4.0(KW)	6.0(KW)
Temperature range	RT+5℃~65℃
Temperature uniformity	≤±2.0℃
Temperature fluctuation	≤±0.5℃
Humidity range	≥95% R.H
Sample rack rotate speed	1~3r/min±10%
Air admission volume	0.5m3/h (0.1~1m3/h adjustable)

 

Chamber Structure
The inner bladder of the chamber is made of imported SUS304 stainless steel plate while the outer bladder is made of A3 steel plate sprayed with plastic. A micro-computer temperature and humidity controller is adopted with precise and reliable temperature and humidity (Japanese OYO meter). A large observation window is set on the chamber door. A test hole with 25mm, or 50mm or 100mm diameter is set on the left of the chamber body. A high-quality fixable PU moving wheel is adopted on the bottom of the test chamber.
Specs & Technical Parameters
Model	UQCTH-100	UQCTH-225	UQCTH-500	UQCTH-800	UQCTH-1000
Workroom dimensions (cm)	45*45*50	50*60*75	70*80*90	80*100*100	100*100*100
Exterior dimensions (cm)	85*102*177	105*102*200	132*132*217	147*152*231.5	167*152*231.5
Power	4.0 (KW)	4.5 (KW)	7.5 (KW)	10.5 (KW)	11.0 (KW)
Temperature range	0℃~150℃
Humidity range	30~98%R.H
Fluctuation / Uniformity	≤±0.5℃/ ≤±2℃
Humidity deviation	＋2, -3% R.H
Temperature rise speed	1.0~3.0℃/min
Temperature fall speed	0.7~1.0℃/min

 

Application
This series is applicable for the heat resistant test of electrical insulation materials and the ventilation climate test of electronic components and parts and plastic products.
Chamber Structure
The inner bladder of the chamber is made of imported SUS304 stainless steel plate while the outer bladder is made of A3 steel plate sprayed with plastic. Adopts P, I, D+S, S or R. microprocessor integrated controller with imported LED digital display A large observation window is set on the chamber door. The aging chamber is equipped with low rotation speed turnplate. The chamber adopts extra-fine glass fiber heat insulation cotton to preserve heat so as to avoid unnecessary energy loss. The time and frequency of ventilation can be set freely.
Specs & Technical Parameters
Model	UQAV-100	UQAV-225	UQAV-500	UQAV-800	UQAV-1000
Workroom dimensions (cm)	45*45*50	50*60*75	70*80*90	80*100*100	100*100*100
Exterior dimensions (cm)	110*83*160	125*93*180	145*110*200	145*140*210	165*148*210
Turnplate diameter	φ300mm	φ400mm	φ600mm	φ700mm	φ900mm
Temperature range	RT+10℃~200℃, 300℃
Uniformity	±2℃
Constant temperature fluctuation	±0.5℃
Ventilation time	1min~99h adjustable
Ventilation volume	2~100 times/h

 

Application
This product is applicable for the dust proof and resistant test of various auto components and parts including lamps, meters, electric dust proof sheath, steering system and lock etc.
Executive Components of Sand Dust Test Chamber
Imported German Klocner Moeller programmable controller is available. Schneider AC contactor, switch and button are available. Panasonic time relay is available. Panasonic dust proof socket is available.
Specs & Technical Parameters
Model	UQSD-500	UQSD-800	UQSD-1000	UQSD-1500	UQSD-2000
Workroom dimensions(cm)	80*80*80	80*100*100	100*100*100	100*150*100	120*180*120
Exterior dimensions(cm)	105*122*155	105*142*182	125*142*182	125*192*182	145*222*218
Power	0.5(KW)	1.0(KW)	1.2(KW)	2.5(KW)	3.5(KW)
Mesh diameter	50um
Wire spacing	75um
Stone powder quantity	2kg~4kg/m3
Hitting time	0~99H59M
Blower time	0~99H59M
Controller	Imported microprocessor programmable integrated controller.

 

Application
This product is applicable for the testing of the indices of the spaceflight and aviation products, materials, electronic products, and electronic and electrical components and parts in humid and heat environment.
Chamber Structure
The inner bladder of the chamber is made of imported SUS304 stainless steel plate while the outer bladder is made of A3 steel plate sprayed with plastic.
A large observation window is set on the chamber door.
Double-layer high-temperature resistant and high-intensity seal is adopted between the chamber door and the chamber body in order to ensure the obturation of the testing area.
A test hole with 25mm, or 50mm or 100mm diameter is set on the left of the chamber body.
A high-quality fixable PU moving wheel is adopted on the bottom of the test chamber.
Cooling and Air Duct System
The cooler adopts original French Tecumseh fully-closed compressor.
The cooling system adopts single or dual low-temperature loop system design.
Air speed ≤0.2 m/sec
Specs & Technical Parameters
Model	UQM-100	UQM-225	UQM-500	UQM-1000
Workroom dimensions (cm)	45*45*50	50*60*75	70*80*90	100*100*100
Exterior dimensions (cm)	108*86*165	115*102*190	145*115*200	165*142*210
Power	4.5(KW)	5.5(KW)	8.0(KW)	13.5(KW)
Temperature range	20℃~80℃
Humidity range	45~98%R.H
Fluctuation / Uniformity	≤±0.5℃/≤±2℃
Humidity deviation	+ 2, －3%R.H

 

Application
SN xenon lamp test chamber adopts the xenon arc lamp that can simulate full sunlight spectrum to reproduce destructive light waves existing in different environments so as to provide the corresponding environment simulation and acceleration test for scientific research, product development and quality control.
Chamber Structure
The inner bladder of the chamber is made of imported high-class stainless steel plate while the outer bladder is made of A3 steel plate sprayed with plastic.
Adopts the full spectrum xenon lamp with the functions of temperature and humidity, illumination, spray and condensation.
Temperature controller: Imported microprocessor temperature and humidity integrated controller
Specs & Technical Parameters
Model	UQXL-500	UQXL-900
Workroom dimensions (cm)	50*76*50	95*95*85
Exterior dimensions (cm)	120*115*148	128*132*198
Lamp quantity	3pcs	1pcs
Lamp cooling mode	Air cooling	Water cooling
Temperature range	RT+10℃~70℃
Humidity range	50~98% R.H
Rainfall time	0~9999 min (adjustable)
Spectrum wavelength	290nm~800nm

 

Application
Used for rubber products such as vulcanized rubber, thermoplastic rubber, cable insulation jacket and other products. Under a static stretching or dynamic continuous tensile deformation, or alternating intermittent dynamic stretching and static stretching deformation, exposed to confined dark chamber with constant concentration of ozone in the air and constant temperature, test the samples according to schedule, from the degree of change of cracks occurred on sample surface or other properties, to assess the ozone-resistant aging properties of rubber. Apply to school, factory, military, research, and so on.
Structure
Using high quality materials, processed by the most advanced domestic equipment, shell surface spray, so looks beautiful and smooth. Coordinating colors, smooth lines. The liner designed as a sealed, no direct illumination space when it works, aging test specimens can be placed in to undergo the test, can control the test temperature deviation ±2 ℃ constantly, made of imported high-quality mirror stainless steel. Indoor sample holder, clamps, catheter and other accessories are made of stainless steel and other materials which are not easy to be ozone decomposition, and doesn’t impact ozone concentration. Sample holder can rotate 360 degrees, speed adjustable. Large observation window attach lights to keep the inner chamber bright, and make use of heating element embedded glass, clearly observe the state inside at any time. Test hole with diameter of 50mm, for external test power supply line or signal line.
Model
Model	Internal Dimension (cm)	External Dimension (cm)
UQRA-100	45*45*50	115*90*165
UQRA-225	50*60*75	120*110*190
UQRA-500	70*80*90	135*128*220
UQRA-800	80*100*100	145*148*230
UQRA-1000	100*100*100	165*148*230
UQRA-1300	100*100*130	165*148*260
Technical Parameters
Temperature range	0℃～60℃
Temperature fluctuation:	±0.5℃
Temperature deviation:	≤±2℃
Humidity range:	≤65% R.H
Temperature uniformity:	+2%  -3% R.H
Speed rate for cooling:	Ambient temperature ~ 0℃ within 20 min.
Timing range:	0～999 hours
Ozone concentration:	0～10000PPHM
Air flow speed:	12-16mm/S
Sample holder rotate speed:	1 r/min (adjustable)
Clamps tensile stretch :	5%～35%
Max. ozone concentration:	120gO3/m³
Ozone output (oxygen input, flow rate 100L/h)	3.5gO3/h
Power & voltage:	AC / 380V
Temperature fluctuation:	±0.5℃

 

Application
This product is applicable for the outer protection of exterior lighting, signal devices and car lamps.
Chamber Structure
The guiding upright column is made with high-quality channel steel welding and exterior splicing of stainless steel drawing blocks.
A sample table with rotate speed adjustable is available.
Control System
Adjusts pressure with flow meter.
Adopts imported frequency converter to control rotate speed in order to ensure the test can be conducted as per the applied standards.
A water filter is equipped.
Specs & Technical Parameters
Model	UQBR-500	UQBR-1200
Workroom dimensions (cm)	80*80*80	102*120*100
Exterior dimensions (cm)	102*136*156	128*172*182
Power	2.0(KW)	2.5(KW)
Water spray ring radius	375 mm	500 mm
Water pipe diameter	φ16mm
Spraying hole diameter	φ0.4mm
Aperture spacing	50 mm
Swing range	±45°, ±60°, ±90°, ±180°
Test bench rotation speed	1r/min, or steeples speed regulating (optional)

 

Application
This series is applicable for the sunlight resistant test of nonmetallic materials and aging test of artificial light sources.
Chamber Structure
The inner bladder of the chamber is made of imported high-class stainless steel plate while the outer bladder is made of A3 steel plate sprayed with plastic.
The heating mode adopts inner bladder trough type heating with its rapid temperature rise and even temperature distribution.
Control System
Adopts black aluminum plate to connect temperature sensor and adopts black board temperature meter to control heating so as to ensure more stable temperature.
The radiometer probe is fixed so as to avoid the frequent installation and disassembly.
The radiation quantity adopts the special UV irradiatometer with high-precision display and measurement.
The radiation intensity is not more than 50W/m2.
The illumination and condensation can be controlled independently or alternatingly and circularly.
Specs & Technical Parameters
Model	UQUV-260
Workroom dimensions (cm)	45*117*50
Exterior dimensions (cm)	58*128*135
Power	4.0(KW)
Temperature range	RT+10℃~70℃
Humidity range	≥95％R.H
Lamp spacing	35mm
Distance between sample and lamp	50mm
Quantity of samples supported	150mm (L) * 75mm (W), about 40 pcs
UV wavelength	290nm~400nm  UV-A,  UV-B,  UV-C
Lamp power	40W